3D Printing#

../_images/cura.png

The latest CAD files can downloaded from this link. The CAD files can be edited in Fusion360. You can also use the .stl files directly for the 3D printing.

The 3D prints were done on a fdm printer with a eSun PLA+ filament. The following settings were used for the print:

  • Layer Height: 0.25mm

  • Wall thickness: 1.2mm

  • infill: 50%

  • Generate support, Overhang Angle:60

../_images/3D.jpg ../_images/3D2.jpg