The Vibe Check Man

by Hendra & Duarte

Project Image	In Action

Have you ever wondered what’s your vibe? We have a technical solution for you- A Vibe Check Man. It will react to you vibe (through a photo resistor) and play music according to it. We have two music: if your vibe is dark it will play Star Wars Theme Music and if your vibe is normal it will play Sans Boss Battle theme song.

Arduino Code

Code Light Sensor (THE VIBES)

int myPhotoresistor = A0;
int buzzer = 11; // pin 11
void setup() {
Serial.begin(9600);
pinMode(buzzer, OUTPUT);}
void loop() {
int lightValue = analogRead(myPhotoresistor); // assign sensor value to
variable
if (lightValue < 500)
{
tone(buzzer, 659); // E5
delay(150);
noTone(buzzer);
delay(30);
tone(buzzer, 659); // E5
delay(150);
noTone(buzzer);
delay(30);
tone(buzzer, 1319); // E6
delay(200);
noTone(buzzer);
delay(30);
tone(buzzer, 988); // B5
delay(200);
noTone(buzzer);
delay(30);
tone(buzzer, 932); // A#5
delay(200);
noTone(buzzer);
delay(30);
tone(buzzer, 880); // A5
delay(200);
noTone(buzzer);
delay(30);
tone(buzzer, 784); // G5
delay(200);
noTone(buzzer);
delay(30);
tone(buzzer, 659); // E5

delay(400);
noTone(buzzer);
delay(200); // pause before looping
}
if (lightValue < 400)
{
tone(buzzer, 392); delay(400); noTone(buzzer); delay(100); // g
tone(buzzer, 392); delay(400); noTone(buzzer); delay(100); // g
tone(buzzer, 392); delay(400); noTone(buzzer); delay(100); // g
tone(buzzer, 311); delay(300); noTone(buzzer); delay(100); // d#
tone(buzzer, 466); delay(100); noTone(buzzer); delay(100); // a#
tone(buzzer, 392); delay(400); noTone(buzzer); delay(200); // g
tone(buzzer, 311); delay(300); noTone(buzzer); delay(100); // d#
tone(buzzer, 466); delay(100); noTone(buzzer); delay(100); // a#
tone(buzzer, 392); delay(600); noTone(buzzer); delay(300); // g
}
Serial.println(lightValue); //print sensor value to console
}

Code Lights

int myPhotoresistor = A0;
int myLed = 8;
int myLed2 = 7;
void setup()
{
Serial.begin(9600);
pinMode(myLed,OUTPUT); //Set Led as output
pinMode(myLed2,OUTPUT); //Set Led as output
}
void loop()
{
int lightValue = analogRead(myPhotoresistor); // assign sensor value
to variable
if(lightValue<1000) {

digitalWrite(myLed,HIGH); //Turn on LED if value us lower then 500
digitalWrite(myLed2,HIGH);
}
else{
digitalWrite(myLed,LOW); //Turn off LED if otherwise
digitalWrite(myLed2,LOW); //Turn off LED if otherwise
}
Serial.println(lightValue); //print sensor value to console
}